SIP settings won't save

[KIWIOBI]

Hi there,
I have an Obi200.

I set up the service providers using the Obitalk interface. I am trying to edit one of them over the HTTP interface, but it will not save the settings I put in there. For instance, I am trying to put in the DigitMap. But after rebooting it reverts to the DEFAULT box being ticked, and my settings are not in there any more.

Is there another way to go about this?

Thanks,

[azrobert]

You can only use one method, local interface or OBiTalk to configure your OBi.
If you use the local interface to configure your OBi you must disable OBiTalk auto provisioning, otherwise OBiTalk will overlay any changes you make.

System Management -> Auto Provisioning
Under OBiTalk Provisioning
Method: Disabled

[KIWIOBI]

Thanks. That's handy to know.
So, am I correct in concluding that the ObiTalk interface provides no means to modify a great many of the service provider settings? Such as the DigitMap?

[azrobert]

You can make almost any configuration change from OBiTalk using OBi Expert.

This is a general OBi Expert guide:
From the OBiTalk dashboard click Edit Profile on the left column.
At the bottom of the page check "Enable OBi Expert..."
Click Submit Query.
Now you can go directly to OBi Expert from the dashboard.

Click OBi Dashboard.
On the right of your OBixxx is an icon with a red E.
Click on it to enter OBi Expert.

To navigate click on the titles with the +
Then click on a sub-title
An example click on Service Providers
Then click ITSP Profile A General
There are 2 boxes to the right of each parameter
To change a value uncheck the box under OBiTalk Setting
Then uncheck the box under Device Default
Now change the value
After you have made all the necessary changes for that page, click Submit at the bottom of the page.
OBiTalk will download the configuration changes to the OBi and reboot it.
Wait until this process is complete before continuing to the next page.

Edit:
If you don't enable the OBi Expert button, you need 4 clicks to get to OBi Expert. Click on the gear ICON, select OBi Expert, confirm and select OBi Expert again.   

[KIWIOBI]

Thanks azrobert...
Very helpful.