Quote from: drgeoff on March 01, 2016, 08:46:06 AM
I have not tried it as the phone connected to my 110 is the 'Press to send complete number' type.
I also have that type of phone, but I get dial tone when I press Talk without dialing anything. Now I can dial like a standard phone.
I did test the S9S9 and it failed. I'm running back leveled firmware on my OBi110, but I doubt that would make a difference. Maybe I did something wrong in testing. If I'm wrong and it is a valid syntax, the following is how I think you should configure and why.
The OBi110 will analyze each digit as it is received.
When using a rule like 1xxxxxxxxxxS9S9 the 18 second wait only applies AFTER the 11th digit is dialed. I don't think this is what you want.
In the ITSP DigitMap only change rule "xx." to "xx.S9S9"
Now there will be an 18 second wait for digits 3-10 and a 2 second wait after the 11 digit
The same wait pattern will apply to 10 digit numbers matching rule "[2-9]xxxxxxxxx"
In the Phone Port Digit Map change rules "[1-9]S9|[1-9][0-9]S9" to "[1-9]S9S9|[1-9][0-9]S9S9"
Now the 18 second wait will also apply to digits 1-2