Hey all,
I'm trying to configure my Obi202 as a SIP gateway using my google voice. I had this working about a year ago, but then made a change to the DHCP on my network, and broke everything. I can't figure out how to walk back the changes so I'm starting from scratch.
I used this guide:
https://www.ukvoipforums.com/download/file.php?id=760But once the Obi202 is configured, I can't get anything to register to it. I tried Xlite as a quick verification that I could register and make a call, but not even that worked.
I also connected my Cisco 7941, but it just keeps saying registering. This is the config I used for my phone.
<device>
<deviceProtocol>SIP</deviceProtocol>
<devicePool>
<dateTimeSetting>
<dateTemplate>D/M/Y</dateTemplate>
<timeZone>Pacific Standard/Daylight Time</timeZone>
<ntps>
<ntp priority="0">
<name>192.168.0.40</name>
<ntpMode>directedbroadcast</ntpMode>
</ntp>
</ntps>
</dateTimeSetting>
<callManagerGroup>
<members>
<member priority="0">
<callManager>
<ports>
<sipPort>5063</sipPort>
</ports>
<processNodeName>192.168.0.150</processNodeName>
</callManager>
</member>
</members>
</callManagerGroup>
</devicePool>
<sipProfile>
<sipProxies>
<outboundProxy>192.168.0.150</outboundProxy>
<outboundProxyPort>5063</outboundProxyPort>
<registerWithProxy>true</registerWithProxy>
</sipProxies>
<sipLines>
<line button="1" lineIndex="1">
<featureID>9</featureID>
<featureLabel></featureLabel>
<proxy>USECALLMANAGER</proxy>
<port>5063</port>
<name>1001</name>
<displayName></displayName>
<autoAnswer>
<autoAnswerEnabled>2</autoAnswerEnabled>
</autoAnswer>
<callWaiting>1</callWaiting>
<authName>1001</authName>
<authPassword>1001</authPassword>
<sharedLine>false</sharedLine>
<messagesNumber>*97</messagesNumber>
<ringSettingActive>5</ringSettingActive>
<forwardCallInfoDisplay>
<callerName>true</callerName>
<callerNumber>true</callerNumber>
<redirectedNumber>true</redirectedNumber>
<dialedNumber>true</dialedNumber>
</forwardCallInfoDisplay>
</line>
</sipLines>
<enableVad>true</enableVad>
<preferredCodec>g711ulaw</preferredCodec>
<dialTemplate>dialplan.xml</dialTemplate>
<kpml>1</kpml>
<phoneLabel></phoneLabel>
<stutterMsgWaiting>3</stutterMsgWaiting>
<disableLocalSpeedDialConfig>false</disableLocalSpeedDialConfig>
<dscpForAudio>184</dscpForAudio>
<dscpVideo>136</dscpVideo>
<sipStack>
<sipInviteRetx>6</sipInviteRetx>
<sipRetx>10</sipRetx>
<timerInviteExpires>180</timerInviteExpires>
<timerRegisterExpires>60</timerRegisterExpires>
<timerRegisterDelta>5</timerRegisterDelta>
<timerKeepAliveExpires>120</timerKeepAliveExpires>
<timerSubscribeExpires>120</timerSubscribeExpires>
<timerSubscribeDelta>5</timerSubscribeDelta>
<timerT1>500</timerT1>
<timerT2>4000</timerT2>
<maxRedirects>70</maxRedirects>
<remotePartyID>false</remotePartyID>
<userInfo>None</userInfo>
</sipStack>
</sipProfile>
<commonProfile>
<phonePassword></phonePassword>
<callLogBlfEnabled>2</callLogBlfEnabled>
</commonProfile>
<featurePolicyFile>featurePolicyDefault.xml</featurePolicyFile>
<loadInformation>SIP41.8-3-5S</loadInformation>
<vendorConfig>
<disableSpeaker>false</disableSpeaker>
<disableSpeakerAndHeadset>false</disableSpeakerAndHeadset>
<pcPort>0</pcPort>
<settingsAccess>1</settingsAccess>
<garp>0</garp>
<voiceVlanAccess>1</voiceVlanAccess>
<videoCapability>1</videoCapability>
<autoSelectLineEnable>1</autoSelectLineEnable>
<sshAccess>0</sshAccess>
<sshPort>22</sshPort>
<webAccess>0</webAccess>
<spanToPCPort>1</spanToPCPort>
<loggingDisplay>1</loggingDisplay>
<loadServer></loadServer>
<daysDisplayNotActive></daysDisplayNotActive>
<displayOnTime>00:00</displayOnTime>
<displayOnDuration>00:01</displayOnDuration>
<displayIdleTimeout>00:01</displayIdleTimeout>
</vendorConfig>
<commonConfig>
<videoCapability>1</videoCapability>
<ciscoCamera>1</ciscoCamera>
</commonConfig>
<sshUserId>user</sshUserId>
<sshPassword>password</sshPassword>
<servicesURL></servicesURL>
</device>
I have been all over this forum and seen many attempts to do the same, and I have tried them all, none work.
Any thoughts?