Anveo IVR / Call flow not working

Started by JoeColoraro, October 02, 2020, 06:32:56 PM

Previous topic - Next topic

JoeColoraro

I have set up an Anveo call flow to start blocking robocalls. But none of the flows ( including the templates) are working. I am calling from Hangouts with an unknown caller ID. It is ringing all the time, regardless of the configured flow.
I boiled it down to a very simple flow. The SIP is set to SIP Legacy, as I am using a standard DECT phone.
Anyone out there who can point me in the direction of my error?

Thank you

Joe