Hi there,
I have been reading through forum posts and manuals and can't find a solution to my problem.
My set up is OBi200:
sp1 =
voip.ms SIP = Canadian number:
digit map:
(*xx|1xxxxxxxxxx|<1519>[2-9]xxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*]@@.)
sp2 = GV outgoing calls only, no number assigned
digit map:
(!911|*xx|<+>1xxxxxxxxxx|<+1519>[2-9]xxxxxx|<+1>[2-9]xxxxxxxxx|<011:+>xx.|(Mipd)|[^*]@@.)
sp3 = zadarma SIP = local land line number in Poland country code = 48, area code = 22 plus 7 digit local phone number
digit map:
(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*#]@@.)
Physical Interface PHONE 1:
digit map:
([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|##|**70(Mli)|**8(Mbt)|**81(Mbt)|**82(Mbt2)|**1(Msp1)|**2(Msp2)|**3(Msp3)|**4(Msp4)|**9(Mpp)|(Mpli))
OutboundCallRoute:
{911:sp1},{933:sp1},{([1-9]x?*(Mpli)):pp},{(<##:>):li},{(<**70:>(Mli)):li},{(<**82:>(Mbt2)):bt2},{(<**81:>(Mbt)):bt},{(<**8:>(Mbt)):bt},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Msp3)):sp3},{(<**4:>(Msp4)):sp4},{(<**9:>(Mpp)):pp},{(Mpli):pli}
I just got zadarma service couple days ago and I can receive inbound calls, however, I cannot dial out from sp3. When I use **3 and dial 9 digit number in Poland I get "Call Ended (400 Content-Length mis-match)" error. Same problem when dialing 00 1 and 10 digit NA phone number.
I have no idea why this is happening, I am out of ideas what to try. If anyone can help me that would be great.
What I would like to eventually achieve is to be able to use sp3 whenever I dial 011 48 (without dialing **3) which I was able to successfully test by using {(01148xx.):SP3} in the OutboundCallRoute. I could see in the logs that the call was routed through sp3, but not completed due to the above described problem.
All other outbound calls I would like to route through sp2 (I have checked box in sp2 for Primary Line for Outgoing Calls Phone 1.
Thank you in advance for your input!