i can dial out number 1234 567 8901 directly ok, but when i try calling speed dial entry for same number, i hear a click and my obi resets. there's no entry under last call. verified number is correct in speed dial entry on device.
when using the following-primary line is set for PSTN:
Phone port
DigitMap:
([1-9]x?*(Mpli)|[0-9]S9|[0-9][0-9]S9|911|119|112|**0|***|#|**1(Msp1)|**2(Msp2)|**8(Mli)|**9(Mpp)|(Msp1)|(Msp2)|(Mpli))
Outbound call route
{([1-9]x?*(Mpli)):pp},{(<#:>|911|119|112):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Msp1):sp1},{(Msp2):sp2},{(Mli):li},{(Mpli):pp}
ITSP Profile A
DigiMap
(1xxxxxxxxxx{t=cm}|<1>[2-9]xxxxxxxxx{t=cm}|<00[1-9]:>{ti=2}1xxxxxxxxxx{t=cm})
Line port
Digimap
(<82:0>2xxxxxxxx?|02xxxxxxxx?|<82:0>[1-9]xxxxxxxxx?|0[1-9]xxxxxxxxx?|xx.)
thanks in advance...