Quote from: pendo on May 02, 2012, 06:35:30 PM
But for some reason, it always says Service Not Configured.
If SP1 Service Status in the OBi is reporting "Service Not Configured", it usually means that AuthUserName is blank.
Log into the OBi directly at the IP address returned by dialing ***1 (default username/password is admin/admin) and verify you have the following settings in order to configure Google Voice on SP1 (everything else should be at Default):
Service Providers -> ITSP Profile A -> General -> Name : Google Voice
Service Providers -> ITSP Profile A -> General -> SignalingProtocol : Google Voice
Service Providers -> ITSP Profile A -> General -> DigitMap:
(<1aaa>[2-9]xxxxxx|<1>[2-9]xxxxxxxxx|1xxxxxxxxxx|011xx.)
where aaa is your local area code.
Voice Services -> SP1 Service -> AuthUserName : (Google Voice username)
Voice Services -> SP1 Service -> AuthPassword : (Google Voice password)
Voice Services -> SP1 Service -> X_SkipCallScreening : (checked)
Physical Interfaces -> PHONE Port -> PrimaryLine : SP1 Service
If you find the need to make any changes to the OBi directly, you must also set:
System Management -> Auto Provisioning -> ITSP Provisioning -> Method : Disabled
System Management -> Auto Provisioning -> OBiTALK Provisioning -> Method : Disabled