Digit map help - want to add prefix to toll free

[Stealthy1]

I've tried googling this but I am having trouble finding the answer.

I want to add **275* to all 800, 866, 877, 888 numbers automatically.  So if I were to dial 18005551212, it would send the VoIP provider **275*18005551212.  This sends it through an alternative route I've found more reliable with DTMF tones.  Can I accomplish this in the digit map?

Currently it is:

(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*#]@@.)

Thanks!

[RonR]

Assuming your PrimaryLine is Google Voice on SP1 and you have Callcentric on SP2, set:


Service Providers -> ITSP Profile A -> General -> DigitMap:

(<**2**275*>(18(00|88|77|66|55)xxxxxxx|<1>8(00|88|77|66|55)xxxxxxx)|(Mste))


Service Providers -> ITSP Profile B -> Gerneral -> DigitMap:

(*123|**275*xx.|[2-9]11S0|(Mste)|(Mipd)|[^*#]@@.'@'@@.)


User Defined Digit MapX
Label: ste
DigitMap : (<1aaa>[2-9]xxxxxx|<1>[2-9]xxxxxxxxx|1xxxxxxxxxx|011xx.)

where aaa is your local area code.

[Stealthy1]

I'm actually the opposite - I use GV sparingly for work calls - so I tried adding below to my dialplan but it is getting rejected - is it because of the **2 sending to GV?

(<**275*>(18(00|88|77|66|55)xxxxxxx|<1>8(00|88|77|66|55)xxxxxxx)|(Mste))

[RonR]

Assuming your PrimaryLine is Callcentric on SP1 and you have Google Voice on SP2, set:


Service Providers -> ITSP Profile A -> General -> DigitMap:

(<'S'B:**275*>xx.|*123|<**275*:SB>xx.|[2-9]11S0|(Mste)|
<SB>(18(00|88|77|66|55)xxxxxxx|<1>8(00|88|77|66|55)xxxxxxx)|(Mipd)|[^*#]@@.'@'@@.)


Service Providers -> ITSP Profile B -> General -> DigitMap : (Mste)


User Defined Digit MapX
Label: ste
DigitMap : (<1aaa>[2-9]xxxxxx|<1>[2-9]xxxxxxxxx|1xxxxxxxxxx|011xx.)

where aaa is your local area code.

[meokey]

Assuming your PrimaryLine is Callcentric on SP1 and you have Google Voice on SP2, set:


Service Providers -> ITSP Profile A -> General -> DigitMap:

(<'S'B:**275*>xx.|*123|<**275*:SB>xx.|[2-9]11S0|(Mste)|
<SB>(18(00|88|77|66|55)xxxxxxx|<1>8(00|88|77|66|55)xxxxxxx)|(Mipd)|[^*#]@@.'@'@@.)


Service Providers -> ITSP Profile B -> General -> DigitMap : (Mste)


User Defined Digit MapX
Label: ste
DigitMap : (<1aaa>[2-9]xxxxxx|<1>[2-9]xxxxxxxxx|1xxxxxxxxxx|011xx.)

where aaa is your local area code.

Hi RonR,

What does the following part in your DigitMap mean and how does it work? Thank you.

Code Select Expand

<'S'B:**275*>xx.|*123|<**275*:SB>xx.|<SB>(18(00|88|77|66|55)xxxxxxx