help with setup

[turuncu]

If I wanted to add one more sip provider and route number that start with 011905+ would I do it like above.  What I tried to do was add a new sip  assign **4.  And for the digimap I have put it infornt of **4.  Would this work

Thanks

Code Select Expand

Physical Iterfaces -> PHONE Port -> DigitMap:

([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|**1(Msp1)|**2(Msp2)|**3(Mvg3)|**8(Mli)|**9(Mpp)|(Mpli))


Physical Iterfaces -> PHONE Port -> OutboundCallRoute:

{([1-9]x?*(Mpli)):pp},{(<#:>):li},{911:sp2},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},
{(<**2:>(Msp2)):sp2},{(<**3:>(Mvg3)):vg3},{(<**4:>(Mvg4)):vg4},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}


Service Providers -> ITSP Profile A -> General -> DigitMap:

(<1>[2-9]xxxxxxxxx|1xxxxxxxxxx||<**4>011905.|<**3>011xx.)


Gateways and Trunk Groups -> Voice Gateway3
Name : Service_Provider_Name
AccessNumber : SP2(SIP_Server_Proxy)
DigitMap : (<011:00>xx.|00xx.)
AuthUserID : SIP_Username
AuthPassword : SIP_Password

Gateways and Trunk Groups -> Voice Gateway4
Name : Service_Provider_Name
AccessNumber : SP3(SIP_Server_Proxy)
DigitMap : (<011:00>xx.|00xx.)
AuthUserID : SIP_Username
AuthPassword : SIP_Password


911                 ->  SP2
10 or 11 digits  ->  SP1
011+               ->  VG3
011905+            ->  VG4


[pc44]

Hi turuncu,

First, if you manually press **4 before dialing your desired 011905 number, does this currently work?  If so, then perhaps you could try the following:

For Service Providers -> ITSP Profile A -> General -> DigitMap:
I would change what you have
(<1>[2-9]xxxxxxxxx|1xxxxxxxxxx||<**4>011905.|<**3>011xx.)
to this
(<1>[2-9]xxxxxxxxx|1xxxxxxxxxx|<**4>011905xx.|<**3>011xx.)

I'm assuming your PrimaryLine is already set to SP1.  Also, could you let us know what currently works and what currently does not work for you?  That may help a little.

Thanks,
pc44

[turuncu]

Hi turuncu,

First, if you manually press **4 before dialing your desired 011905 number, does this currently work?  If so, then perhaps you could try the following:

For Service Providers -> ITSP Profile A -> General -> DigitMap:
I would change what you have
(<1>[2-9]xxxxxxxxx|1xxxxxxxxxx||<**4>011905.|<**3>011xx.)
to this
(<1>[2-9]xxxxxxxxx|1xxxxxxxxxx|<**4>011905xx.|<**3>011xx.)

I'm assuming your PrimaryLine is already set to SP1.  Also, could you let us know what currently works and what currently does not work for you?  That may help a little.

Thanks,
pc44

Sorry I was out of town. 

My phone works fine but I don't have the **4 part yet.  I am thinking about getting a really cheap voip plan to call 00905xxx but I have not done so.  The reason that I post was to see if my syntax was correct. 

Thanks for your help

T