Hello,
New OBi110 connected to Netgear WNR-834B V2 (stock firmware) which itself is connected to a cable modem. This router has NO SIP ALG setting.
Desk phone is connected to PHONE Port of this OBi110
Bell phone line is connected (for now) to LINE Port of this ATA
Google Voice (GV) -> SP1: CONNECTED
(Primary Line box NOT checked)
VOIP.MS (VOIPMS) -> SP2: REGISTERED
Voice Services for SP1 & SP2: Enabled
I can call out to a local 10-digit number via GV (**1) or via VOIPMS (**2).
However, a neighbor cannot call my local VOIPMS-DID number via Bell. She said there was no ring and she heard a voice message saying "the extension you dialed is not in service".
I have not touched the default Digit Maps of SP1/SP2
I also noticed that:
1. Echo test (**9 222-222-222) is OK
2. X_InboundCallRoute=ph
3. AuthPassword: keeps showing blank DESPITE me filling in password then Submit (same problem with both SP1 & SP2 SIPs)
Any ideas or suggestions?
Thanks in advance for your help.