Calls made from Phone 1, if US call (+1) then dial through SP1.
Log in to your device.
Go to Physical Interfaces=>Phone 1=> Phone Port=> Digit Map: add this |1xxxxxxxxxxS0|
Explanation: this will save you 3 seconds, basically it tells the device to immediately (S0) dial the number when you enter the 11th digit, and you don't have to press the # at the end.
Then go to: OutboundCallRoute and add this: {(1xxxxxxxxxx):sp1},{(011xx.):sp4}
Calls made from Phone 2, if US call (+1) then dial through SP2.
All international calls (011), dial through SP4.
Same thing as above.
SP4 is to just be an incoming line - calls ringing on this, should ring on Phone 1 and Phone 2. That I can do using the interface quite easily.
When you configure SP4, check Incoming Calls Will Ring On Phone 1 Phone 2
Or you can go to Voice Service=>SP4=>X_InboundCallRoute and add this {ph1,ph2}
Hope this will help you, don't hesitate to ask any question.
Thank you!
[/quote]