I have an OBi-202 with four numbers, and an OBi-110 with two numbers. I 202 is plugged into the 110's POTS line port. If any of the 6 numbers ring, I can answer them on the cordless phone attached to the 110. All works well.
But, is it possible to enter a ** command on the 110 to select a line on the 202?
I tried **8 **8 xxxxxxxxxx to see if it could get to the 202's BT port (**8 to select the line port on the 110, followed by **8 to select the BT port on the 202.) That doesn't seem to work very well.
I just want to avoid having to use multiple phones for the house. Suggestions appreciated.
Shawn