Quick setup for GV & SIP on OBI110 please

[peterman]

Can someone give me the setup for this:

SP1: GV for USA/Canada 1xxx-xxx-xxxx
SP2: SIP(voip.ms) for the anything else (like 011-xxxxx) including 911

Thanks

[CoalMinerRetired]

I'm not completely clear what you are asking, are you planing to use the ObiTalk Portal, or the "Web Server-Based Local Configuration"?

To not sugar coat it, if you're not familiar with either of those options, you should start with the Obitalk portal, use their wizards, and for the 911 on Voip.ms, check the box for "Use this service for 911...".

I'll add this also, Obihai has some thorough videos and illusrtared how to's, have you looked at they yet?  Voip.ms has some equally detailed instructions also (1, 2). Have you reat through them yet? People here are going be reluctant to step you through the basics when the basics are so thoroughly documented else where.

[peterman]

I just need the DIgimap for Profile A/B:

My current Profile A (GV) Digimap is:
(*xx|1xxxxxxxxxx|<1514>[2-9]xxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*]@@.)
My current Profile B (SIP) Digimap is:
(*75xx|*xx|1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*]@@.)

I think they are not good
Profile A is for GV on SP1 (all 10 digit calls, add 1 automatically)
Profile B is for SIP on SP2 (all the rest including the 911).

I'm using the obi110 web server interface setup not obitalk.

[ianobi]

Please give us the following info:

Physical Interfaces -> PHONE Port -> PrimaryLine

Physical Interfaces -> PHONE Port -> DigitMap

Physical Interfaces -> PHONE Port -> OutboundCallRoute

Lots of things work together in OBi to achieve the correct result!

[peterman]

Here you go:

Physical Interfaces -> PHONE Port -> PrimaryLine :
SP1

Physical Interfaces -> PHONE Port -> DigitMap :
([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|**1(Msp1)|**2(Msp2)|**8(Mli)|**9(Mpp)|(Mpli))

Physical Interfaces -> PHONE Port -> OutboundCallRoute :
{911:sp2},{([1-9]x?*(Mpli)):pp},{(<#:>|911):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}

[ianobi]

Service Providers -> ITSP Profile A -> General -> DigitMap:

(<1514>[2-9]xxxxxx|<1>[2-9]xxxxxxxxx|1xxxxxxxxxx|<**2>011xx.)

Service Providers -> ITSP Profile B -> General -> DigitMap:

(*75xx|*xx|1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*]@@.)

All North American codes will route via sp1 - GV
011xx. codes will automatically route via sp2 – voip.ms
Any number can be routed via sp2 – voip.ms, by prefixing it with **2. This may be useful if GV is not working for some reason.
911 is a special case. The Phone Port OutboundCallRoute will route that  to sp2 – voip.ms directly with no DigitMap involved.