My POTS line is hooked to OBI110 Line1. The POTS line is set with the Telco to unconditionally forward all calls to my Anveo number which puts them through a call flow to weed out blacklisted numbers, not rung at night, etc. SP2 is connected to Anveo so once a call makes it throught the processing it comes to SP2 and rings the analog line connected to the OBI110. That all works.
The problem is Centurylink makes the POTS line ring on Line1 one time before a call is forwarded. So every call rings the analog phone once then forwards and comes back in SP2 if it makes it through the call processing. Centurylink can't stop the one ring.
Is there a OBI configuration setting that would allow me to never ring the analog line when a call appears from Line1?
You might ask why I don't just unplug the POTS line since that would stop it. My wife wants to be able to pickup the analog phone and place a call on the POTS number so I can't do that. Long term I will just port the POTS number to Anveo and keep the POTS for my alarm, but that takes a while.