Hello, in anticipation of the need to abandon GV, I need some clarification on making the process painless.
Current setup:
OBI110
OBiTalk Provisioning disabled
SP1-GV-outgoing
SP2-CC-incoming, E911
CC DID number is forwarded to by my GV already ported landline.
New setup:
SP!-CC-outgoing, pay per call
SP2-CC-incoming, pay per call
So, to make this work:
1. I unlocked my GV ported number and it's ready to be ported to CC.
2. I need to buy the new CC plan, pay the port fee and initiate the port with CC.
3. I shouldn't need to change SP2 settings since these already work with CC.
4. Once SP2 is working for incoming calls to my original landline number, I will then buy the CC plan for SP1, outgoing.
5. Can I keep the same digimap now for SP1 with GV:
(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*#]@@.)
or do I need to change it for CC?
6. I need to change to CC settings in: Voice services > SP1 service > SIP credentials
7. Under Physical Interfaces > phone port >phone port I see these settings. Any changes required here?
DigiMap (default)
([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|**1(Msp1)|**2(Msp2)|**8(Mli)|**9(Mpp)|(Mpli))
Outbound CallRoute
{911:sp2},{([1-9]x?*(Mpli)):pp},{(<#:>|911):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}
CallReturnDigiMaps (default)
{pli:(xx.)},{sp1:(<**1>xx.)},{sp2:(<**2>xx.)},{li:(<**8>xx.)},{pp:(<**9>xx.)}
PrimaryLine
SP1 Service
=================================
Is all this right?
Once GV number is ported out then I will have no GV number, so do I lose the account? Should I add another GV number just to have access to the account?
Finally, should I enable OBITalk provisioning and let the settings all be populated quicly and then disable the provisioning again?
Any help is much appreciated.
-Art
Boston, MA