News:

On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT

Main Menu

Help with Speed Dial

Started by tkc9789, April 30, 2011, 06:12:12 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

tkc9789

April 30, 2011, 06:12:12 PM
I'm unable to configure speed dial from OBiTalk portal. for example, if I entered next to ID#3 the name and number I wish to dial.  The entry does not work and *75 returns nothing for SD#3.
If program this with the handset using *74, things appears to work OK.  BTW, how do I delete the speed dial entry that was configured using the handset? In my case,  I used 99 for testing.  But ID#99 does not show up in OBiTalk.

RonR

#1
April 30, 2011, 06:39:38 PM
Quote from: tkc9789 on April 30, 2011, 06:12:12 PMI'm unable to configure speed dial from OBiTalk portal.

Do you have the following setting in your OBi?:

System Management -> Auto Provisioning -> Auto Provisioning -> Method : Periodically


Quote from: tkc9789 on April 30, 2011, 06:12:12 PMBut ID#99 does not show up in OBiTalk.

That's a previously reported bug.

tkc9789

#2
April 30, 2011, 06:54:31 PM
auto provisioning is currently off.  What is periodically? Thanks.

RonR

#3
April 30, 2011, 07:04:39 PM
Auto Provisioning MUST be disabled if you wish to configure the OBi locally/manually.

Auto Provisioning MUST be enabled (periodically) if you wish to have OBiTALK configure the OBi.

There's no in-between.

tkc9789

#4
April 30, 2011, 07:26:22 PM
Got it.  Thanks very much Ron.

RonR

#5
April 30, 2011, 10:10:34 PM
Quote from: tkc9789 on April 30, 2011, 06:12:12 PMBTW, how do I delete the speed dial entry that was configured using the handset?

See this topic:  http://www.obitalk.com/forum/index.php?topic=787.0
Print
Go Up Pages1
User actions