Transfer Settings From One Obi100 Obi110 to Another Hardware Unit

[pyyhkala]

Hi,
Is there a way to copy the settings, configuration, service providers, etc. from one OBI unit to another?

In my case its a combination of settings via the OBiTalk portal and some expert mode settings.

Or just a "swap device" type function e.g. if a user replaces a device, or switches between say an OBi110 to a OBi100.

Thank you.

[RonR]

You should already be backing up your OBi configuration using:

System Management -> Device Update -> Backup Configuration (check Use OBi Version)


This backup file can be restored to another OBi using:

System Management -> Device Update -> Restore Configuration


This is all done locally.  OBiTALK is not involved.


NOTE: Passwords are not included in a backup file and will have to be restored manually.

[Roger]

Good point RonR.  That was very helpful!

[heny]

You should already be backing up your OBi configuration using:

System Management -> Device Update -> Backup Configuration (check Use OBi Version)


This backup file can be restored to another OBi using:

System Management -> Device Update -> Restore Configuration


This is all done locally.  OBiTALK is not involved.


NOTE: Passwords are not included in a backup file and will have to be restored manually.

Just to confirm, even I made all my settings in obitalk.com, I can still backup settings locally, since all settings are transferred back from obitalk.com to my local obi100 device. is that right?

thanks.