News:

On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT

Main Menu

Monitor usage?

Started by vaggarwa, May 20, 2014, 11:23:13 AM

Previous topic - Next topic

vaggarwa

Hi Guys is there any way to monitor usage on a OBI202?

I am still learning digimaps etc...

I have 2 SP's.  SP1 gives me 60 min free international.  When the 60 min are up, I want to be able to route thru sp2, for which I pay a per min fee.

I know its prob a long shot, but is there any way of accomplishing this?

Thanks!

Shale

You may find the history to be useful.

To check the call history log:

1.  If you do not know the IP address of your OBi, find IP address:
from your phone dial ***1 and listen for the IP address.  Write it
down.

2.Let a comma represent a pause. On your connected phone,
dial ***0,30#, 1, 1 (for OBi202 for first time to enable WAN web access).
For OBi100, 110, 200 or subsequent OBi202 access instead dial just ***1.

Your OBi should read your current IP number to you. It is often
192.168.__.__ or 10.0.__/.___ where __ represents some numbers. Write
that down.

3. Enter the IP address that you wrote down into the address box on your
browser. If you don't know what a browser is, that means Internet Explorer,
Chrome or Safari. It could  also mean Firefox,  etc.

Be prepared to enter the password for your OBi. The username is admin.

4. On the left, click Status -> Call History.