I saw the following from Ronr:
Service Providers -> ITSP Profile A -> General -> DigitMap:
(<**8>[2-9]11|1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|<**8>xxxxxxx|011xx.|(Mipd)|[^*]@@.'@'@@.)
Physical Interfaces -> LINE Port -> DigitMap : ([2-9]11|1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|xxxxxxx|011xx.)
Physical Interfaces -> PHONE Port -> PrimaryLine : SP1 Service
[2-9]11 -> LINE Port
7 digits -> LINE Port
10/11 digits -> SP1 Service
011+ -> SP1 Service
--------------------------
This is close to what I need, but would like to have calls to area codes 800, 866, 855, 877 and 888 go out on the line port. I call into a conference calling system often that doesn't behave well with GV. I got through the following, but was not sure how to account for the non-toll free, where the area code starts with an '8'. Also, I wonder if this all works simpler by making the line port primary.
(<**8>[2-9]11|1[2-79]xxxxxxxxx|<1>[2-79]xxxxxxxxx|<**8>1800xxxxxxx|<**81>800xxxxxxx|<**8>1855xxxxxxx|<**81>855xxxxxxx|<**8>1866xxxxxxx|<**81>866xxxxxxx|<**8>1877xxxxxxx|<**81>877xxxxxxx|<**8>1888xxxxxxx|<**81>888xxxxxxx|<**8>xxxxxxx|011xx.|(Mipd)|[^*]@@.'@'@@.)