Quote from: azrobert on March 11, 2024, 09:04:03 PMAnyway, I can make suggestions when you need to change your config.
Thanks for your offer. I'm playing around with these ideas today. New plan is as follows.
SP1 =
VoIP.ms for North America & most international calls
SP2 = Telnyx for UK calls (10 & 11 digit numbers in UK localized format beginning with 01, 02, or 07 and having a total of 10 or 11 digits.
SP3 = Sipgate for UK freephone numbers (0800 / 0808) 10 or 11 total digits
ITSP A DigitMap would become :
(*xxxx|1xx|<:1780>[2-9]xxxxxx|<:1>[2-9]xx[2-9]xxxxxx|1[2-9]xx[2-9]xxxxxx|011[2-9]x.|310xxxxS0|'*97'|(Mipd)|[^*]@@.)
ITSP B DigitMap :
(0[127]xxxxxxxxx|0[4568]xx.|1xxxx|1xxxxxx|00xx.) - I'm just not sure how to make it accept 10 or 11 digits...
ITSP C DigitMap :
((0800|0808|)xxxxxx.S3)
New Phone 1 Port Outbound Call Route :
{(01|02|07)xx.):sp2},{(08(00|08)xx.):sp3},{(18(00|88|77|66|55|44|33)xxxxxxx):sp1},{(Msp1):sp1},{(Mcan1):sp1},{(Msp3):sp3},{(Msp4):sp4},{([1-9]x?*(Mpli)):pp},{(<##:>):li},{(<#:>):ph2},{(<**70:>(Mli)):li},{(<**82:>(Mbt2)):bt2},{(<**81:>(Mbt)):bt},{(<**8:>(Mbt)):bt},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Msp3)):sp3},{(<**4:>(Msp4)):sp4},{(<**9:>(Mpp)):pp},{(Mpli):pli}
My current Phone 1 DigitMap would probably need to be changed as well. It is currently :
([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|##|((0800|0808)xxxxxx.S3)| **70(Mli)|**8(Mbt)|**81(Mbt)|**82(Mbt2)|**1(Msp1)|**2(Msp2)|**3(Msp3)|**4(Msp4)|**9(Mpp)|(Mpli)|(Mcan1)|(Msp3)|(Msp4))
This probably also needs a change to accommodate UK 10 or 11 digit numbers.
Open to all suggestions relating to tidying up / efficiency / reduced wait times on dialing.
Thanks in advance!