claude,
Quote from: claude on November 23, 2012, 04:18:01 AM
for a normal phone line i dial 514 xxx xxxx then i press 22 and i am connext with my secretary
with obi i want to go through the aa and be directed to extention 22 withou pressing 22
is it possible? or it can be done only with the obi 110 *8
I'm not certain this will work, because I think all the digits are sent at the same time, however why don't you try the following in the inbound call route:
sp1(5145559999
22)
or
sp1(5145559999#######
22)
In the first case you might be lucky and the PBX will pickup immediately and transfer you to ext 22.
In the second case, the PBX should answer since the 10 digit number was used to make the call. The '#', if needed should add some time to the call in order for the PBX to accept ext 22. On my PBX pressing '#' repeats the IVR message indefinitely. Play around with how many '#' you may need.
EDIT:
I think all the digits are all sent at the same time, I doubt that it will work. The # will be sent with the tel number all at the same time.