Thanks for the reply guys. Sorry took me a bit to get back.
Well i am not sure if VOIPJumper supports calling without registration, but i need to find out.
So far i have made the following changes.
Physical Iterfaces -> PHONE Port -> DigitMap:
([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|**1(Msp1)|**2(Msp2)|**3(Mvg3)|**8(Mli)|**9(Mpp)|(Mpli))
Physical Iterfaces -> PHONE Port -> OutboundCallRoute:
{([1-9]x?*(Mpli)):pp},{(<#:>|911):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Mvg3)):vg3},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}
Service Providers -> ITSP Profile A -> General -> DigitMap:
(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|<**3>011xx.|xx.|(Mipd)|[^*#]@@.)
Gateways and Trunk Groups -> Voice Gateway3
Enable - Yes
Name - VOIPJumper
AccessNumber - SP1(sip.voipjumper.com)
DigitMap : (<011:00>xx.|00xx.)
AuthUserID : username
AuthPassword : password
When i dial using 011, it says service not available. Maybe its a problem with VOIPJumper registration.
@Felix -> To call out of North America, you need to use 01191xxxxxxxxxx.
When i dial out it says "No Service Configured Error. Please logon to
Obitalk.com........."
Anything i am doing wrong? Is there a test SIP client i can use to see if my settings are correct?