Quote from: ianobi on May 27, 2013, 08:01:04 AM
More testing has solved most of the problems. I'm assuming that the incoming call is on sp1 and the aim is to use sp2 to get distinctive ringing for one set of calls.
Sorry if I've led you down the wrong path. Your assumption is not correct. Let me give you more details of my setup and what I'm trying to accomplish.
I have a Obi202. I have two lines with CallCentric. One account is set to ring on phone1 and the other is set to ring on phone2. I currently have line one set up on the Obi as sp1 and the other line as sp2. Using your earlier directions I just substituted sp3 in place of where ever you said sp2 and using ProfileC where you specified ProfileB.
Family might call in on either line. When any of them call in I want a different ring pattern than the default for that line. So, I can't just direct all family calls on sp1 to sp2 and have that use a different ring pattern.
Does this make it easier or, more likely, more difficult? I can do this on the Linksys/Cisco by entering the family phone numbers into the appropriate text box in the configuration screens.
BTW, I'll trade my house full of relatives today for your rainy day, and I'll through in dinner.
I haven't tried your latest solution since, based on the assumption you used, it won't work for my situation.
Continuing thanks for your efforts.
Bob