RonR,
Thanks, this is good information. I found the two entries that you cited,
Auto Attendant Digit Map (unmodified)
---------------------------------------------
([1-9]x?*(Mpli)|[1-9]|[1-9][0-9]|<00:$1>|0|**1(Msp1)|**2(Msp2)|**8(Mli)|**9(Mpp)|(Mpli))
Auto Attendant OutboundCallRoute (unmodified)
----------------------------------------------------------
{([1-9]x?*(Mpli)):pp},{0:ph},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}
However, I am having trouble with the modification syntax. Starting on page 113 of the Administration Guide, I read that curly braces are used to modify the rules. Rather than messing this up completely, a concrete example here would be of great help. Also, if this modification is done to each OBi, I am assuming that each can access the other's IVR.