Quote from: Ansextra on December 05, 2014, 08:19:19 PM
I have two phones set up on my Obi202. When SP2 gets a voicemail it shows up on SP1 as well. When the VM on SP2 is cleared it clears on SP1 as well. Is there any setting I can use so this doesn't happen? I need my two phones to be independent.
Ansextra,
If you are using "OBiTalk" to configure your OBi202, check the following.
OBiTalk > Device Configuration - OBi202 >
Phone Port Configuration Summary {Example from my OBi202}
Phone 1 Phone 2
Primary Line for Outgoing Calls Route to: SP2 SP2
Phone Rings on Incoming Calls from: SP1,SP2,SP3 SP4
Voicemail Notification Alert from: SP1 SP1,SP3,SP4
Emergency Service Call Routes to: SP1 SP1
The options are configured by selecting Settings under:
> Configure Voice Service Providers (SP) {Configure each SP}
Service Provider Set-Up
Configuration Name OBi202 xxxxx
Primary Line for Outgoing Calls [ ] Phone 1 [ ] Phone 2
Incoming Calls Will Ring On [ ] Phone 1 [ ] Phone 2
Voicemail Notification (Optional) [ ] Phone 1 [ ] Phone 2