I am having a challenge forwarding Google Voice to my OBi200.
1.
In January 2015 I have bought OBi200 and for testing purposes setup US Google Voice number on SP1;
it worked OK.
2. Then I ported my Canadian landline number to
Voip.MS3. We failed to setup
Voip.MS on SP1; so my
Voip.MS was setup on SP1 and worked OK.
I did not use my US Google Voice number since then (since it was overwritten by
Voip.MS settings).
4.
In March I "upgraded" my Rogers Internet connection and installed a new Hitron CGN3ACR cable modem.
As a result I had a challenge to make OBi200 working.
To resolve this issue I put an additional DIR-615 router behind Hitron CGN3ACR to create a special subnet for OBi200.
Voip.SM started working again, however network parameters of OBi200 have changed.
Is this important at all considering that
Voip.MS worked OK on SP1?
5.
In November 2015 I tried to setup Google Voice on SP2 using
http://www.obitalk.com wizard.
According to
http://www.obitalk.com Google Voice was setup OK on SP2:
- However I do not see SP2 enabled on OBi200
-
my phone doesn't ring when I dial my Google Voice number;
I left a message and it was recorded and forwarded to me by e-mail.
My
Voip.MS number still works OK.
Does it mean that
https://www.obitalk.com changes were not propagated to my OBi200 and that
https://www.obitalk.com displays erroneous status?
P.S. I have my Google Voice calls forwarded to Google Chat on
https://www.google.com/voice#phones