How do I make SP1, on my Obi 100, be the default dial out?

[bitstopjoe]

 Ever since I HAD to upgrade my firmware last month for some reason my Obi 100 insists on making SP2 my default dial out using my secondary GV number. Of course I can add **1 to any number and it then uses SP1. How do I make it use SP1 by default? If I delete SP2, my Obi stops dialing out totally. I checked all my settings via my IP and nothing I do seems to help. I rarely post as I prefer to figure things out myself ( hey how else does one learn)
I did a search but I did not find any info or my brain didnt see it.

Thank you

Joe Sica

[drgeoff]

Try Physical Interfaces, Phone Port, Phone Port, Primary Line. Select SP1 from the drop down.

[bitstopjoe]

 Yep tried that. I ONLY have SP1 phone port checked, not SP2..

Thank you for trying though

Joe

[drgeoff]

1.  Make sure you are not falling foul of the local GUI versus portal gotcha.

2.  Post your Phone ports Digit Map and OutboundCallRoute.

[bitstopjoe]

 Thank you. Seems the Phone Port primary line was on SP2, even though I never changed it..That fixed it, thank you. No idea how it got changed, which is why never dawned on me to look there!!! DOH!


Thank you again

Joe