July 27, 2021, 11:48:03 am *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
  Print  
Author Topic: obihai200 flashing green light - no ip address  (Read 3647 times)
RowanBraxton
Newbie
*
Posts: 1


« on: January 04, 2020, 05:47:01 am »

I've had this obihai200 devices for about 4/5 years. I never used it. I tried to configure it when i first got it but was getting an issue with it not finding a network. I then had no use for it since i have a obi100 devices working fine. I got it because it did fax and I need to send faxes.

I tried to setup from time to time but got same issue and let it go but today i'm trying to be more adament about trying to resolve it.

I plug the obihai device into the same ethernet line that i plug my laptop into and know it works 100%. When i try to plug it into the obihai i get the flashing green light. From what I know, it's not able to obtain an IP Address.

I open up my router and try to see if i can find the device via the mac id and try to setup a DHCP but to no avail i can not find the device at all via the mac id.

I do a factory reset by using a paperclip. Then i do a *** 8 and it flashes off, turns red and turns back on but then it's blinking green still.

I try to manually setup an ip address via: 2. To enter IP address, dial *** 4, dial 1, dial IP address & #, dial 1 to save. IP Address 192.168.1.120 would be entered as: 1921681*120#
Logged

drgeoff
Hero Member & Beta Tester
*****
Posts: 5402


« Reply #1 on: January 04, 2020, 06:13:46 am »

Is it definitely an OBi200, not an OBi202?

Are you trying with the same ethernet cable that works with your OBi100 or computer?

Examine the ethernet socket and check for broken or bent contacts.
« Last Edit: January 04, 2020, 06:15:40 am by drgeoff » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC

Advertisement
Advertisement