I am trying to setup new Obi device.
I would like to set it up so all local calls go through Google voice on SP1
911 goes through the land line (I think by default it is set up like that)
and all my international goes through betamax (when I dial 011xx it converts it to 00xx)
RonR helped with a previous setup and I though I would be ok on this one but it is not working out.
Here is my setup
Physical Iterfaces -> PHONE Port -> DigitMap:
([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|**1(Msp1)|**2(Msp2)|**3(Mvg3)|**8(Mli)|**9(Mpp)|(Mpli))
Physical Iterfaces -> PHONE Port -> OutboundCallRoute:
{([1-9]x?*(Mpli)):pp},{(<#:>|911):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Mvg3)):vg3},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}
Service Providers -> ITSP Profile A -> General -> DigitMap:
(<1>[2-9]xxxxxxxxx|1xxxxxxxxxx|<**3>011xx.)
Gateways and Trunk Groups -> Voice Gateway3
Enable Yes
Name Poivy
Access number 77.72.169.131 When I tried SP2(SIP_Server_Proxy) I was getting a message from obi stating the account was not valid I don't understand the SP2
DigitMap : (<011:00>xx.|00xx.)
AuthUserID : My sip username
AuthPassword : My sip Password
With these settings I am getting a busy signal when I dial 011xxxx and the call log shows the following
Call 1 03/24/2012 20:37:37
Terminal ID PHONE1 OBiTALK1
Peer Name
Peer Number **3011902325648484 _g377.72.169.131*00902325648484
Direction Outbound Outbound
20:37:37 New Call
I am pretty sure that I have the correct login info for poivy. Is there a log file where it shows if it successfully logged on to the accounts.
Thanks for all the help
T