Dial plans

[Clive]

Hi guys, sorry if this is already out there but have been looking for ages and can't seem to find anything that fits.

I just can't get to grips with dial plan strings.

I'm sure this is easy for you guys so here goes.
Currently I simply need to:
1) add 0034 to any 9 digit number dialled (obi 100)
2) add 0034 to any 9 digit number dialled. route 112 to pstn (obi 110)

Again, sorry to ask what might be something relatively basic.

Thanks in advance.

[ianobi]

Clive,

Add these rules to the relevant DigitMaps - ITSP Profile A/B > General > DigitMap or Line Port > DigitMap:

(<0034>xxxxxxxxx|0034xxxxxxxxx|

Emergency number 112 is a different matter for an OBi110. Look in Phone Port DigitMap and Phone Port OutboundCallRoute and in both cases replace 911 with 112. This makes 112 a special case and it will be sent to line directly with no processing through DigitMaps.

[Clive]

ianobi, many thanks for your nice and easy response. absolutely great.
Is the open parenthesis supposed to be there without a closing one?

[ianobi]

It should be followed by the rest of the DigitMap:

(<0034>xxxxxxxxx|0034xxxxxxxxx|... rest of DigitMap ... )

[Clive]

Sorry not been back before now.
Many thanks again for explaining in simple terms. Works a treat.