On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT
OBi2182
OBi1022
Poly D230
OBi200
OBi202
OBi212
OBiWiFi5G
Started by ArbitaryTwist, February 14, 2013, 06:26:18 PM
Quote from: azrobert on February 22, 2013, 08:30:33 AMYou are not following my example in Reply #11. You have a conflicting definition in your configuration that nobody can see. That is why I removed the "**3" from your ITSP DigitMap and moved the rules to the beginning of your Phone DigitMap and OutboundCallRoute.Edit:Dial 0081xxxxx, not **30081xxxxxEdit2:What is your Phone Port Primary Line set to?
Quote from: azrobert on February 22, 2013, 12:21:47 PMI defined Speed Dial #18 as:sp1(0081123456789@sip.voipjumper.com;ui=UserID:password)I dialed 18#. The call went out SP1 and I received a response (403 Forbidden). This is what I expected because I don't have an account at VOIP Jumper.Can you try using a Speed Dial just to see if it works. The Speed Dial will bypass any DigitMap or OutboundCallRoute processing.
Quote from: azrobert on February 22, 2013, 12:52:40 PMThis proves sp1 is functioning. Did the call connect to the number you dialed?Now try a Speed Dial defined as:vg3(0091123456789)