On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT
Started by Arghtastic, January 17, 2014, 07:28:10 AM
Quote from: cluckercreek on February 10, 2014, 08:34:43 AMAre you getting your stuttertone and light indicator for voicemail after doing this?
Quote from: intelafone on February 10, 2014, 06:14:22 PMMWI works great with the service. We initially had some bugs with the MWI lights and stuttering dial tone but those problems have been resolved. If you use the easy setup utility the MWI is installed correctly by default. If you are using the Obihai Obitalk.com portal you will need to follow the instructions here https://intelafone.desk.com/customer/portal/articles/1413429-mwi-on-obi-stuttering-dial-tone-message-waiting-notificationLet me know if you need any further assistance setting up MWI.
Quote from: MarcJ on February 11, 2014, 10:57:37 AMAnother "so far so good" post ... the only thing I'm missing is E911 - the Obihai portal shows my SP1 as still being Google Voice and that it can't support 911 service. But inbound and outbound calls, spoofing the previous GV # are all working perfectly. Any ideas?
Quote from: intelafone on February 11, 2014, 11:35:41 AM When you dial 911, your true Caller ID (and E911 info) will display, not your spoofed number.
Quote from: cluckercreek on February 11, 2014, 05:34:58 PMI have to give a big thumbs up to Ryan @ Obivoice. He has been working with me, patiently I may add, to get my Stutterton issue straightened out. I now have stuttertone!!!!!! Kudos to Obivoice!!!
Quote from: DrewMan on February 05, 2014, 10:11:17 AMSetting up Obivoice as a Mobile does not affect the time to pick up. It does allow you not to set up GV voicemail on that "device". This eliminates GV voicemail altogether and defaults to the Obivoice vmail.... the way a mobile phone would default to the service provider's vmail. Hope I am being clear.
Quote from: kallsop on February 15, 2014, 08:55:23 PMHere's a strange one. Did a full reset on my Obi202 and ran the config tool at Obivoice. Forwarded my GV # to the Obivoice #. Set up Obivoice CID spoofing to use the GV number. Everything works for incoming and outgoing.But, every few hours I now get a call with caller ID of 100. Answer the call, nothing but silence. The Obivoice call log does not show the call at all, neither does the GV call log. Any ideas why we get these calls?
Quote from: Dixon on February 15, 2014, 07:01:17 PMYou don't need to setup 911 on the Obi with Obivoice. 911 is handled through OV. So if OV is setup and working on the Obi, 911 should work. Check your 911 info at https://www.obivoice.com/e911.php
Quote from: eclas on February 16, 2014, 04:47:27 AMOk, I started from scratch. I deleted both SP1 and 2 from my dashboard at obitalk then unplugged the obi110 to reset it.I went to the obivoice web portal and re-sent the automatic configuration and updated the E911 info.No change at all. Phone service fully working with my GV number showing on caller ID BUT when trying to dial 911...I still get the device not configured error.At this point I give up and if intelaphone can't get my 911 service working by early this week i'll probably dump it and look elsewhere.
Quote from: ceg3 on February 16, 2014, 06:08:19 AMQuote from: eclas on February 16, 2014, 04:47:27 AMOk, I started from scratch. I deleted both SP1 and 2 from my dashboard at obitalk then unplugged the obi110 to reset it.I went to the obivoice web portal and re-sent the automatic configuration and updated the E911 info.No change at all. Phone service fully working with my GV number showing on caller ID BUT when trying to dial 911...I still get the device not configured error.At this point I give up and if intelaphone can't get my 911 service working by early this week i'll probably dump it and look elsewhere.If you want to start over and run the Obivoice easy setup tool just ignore the OBiTALK management page. In fact, you could just delete your OBi if you wanted. I think you have already deleted SP1 and 2. Before running the easy setup tool do a complete reset of the device by entering ***81, wait 30 seconds, and then run the setup tool. That reset is more complete than just power cycling by unplugging and replugging in your OBi. That would give you true new start.