On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT
OBi2182
OBi1022
Poly D230
OBi200
OBi202
OBi212
OBiWiFi5G
Started by mrjoli021, May 18, 2014, 08:53:45 AM
Quote from: mrjoli021 on May 18, 2014, 08:53:45 AMHello,I have an obi202 setup SP1 to only ring phone1 and SP2 to only ring phone2, but when an incoming call arrives both ports ring. How can I set it up so that only phone1 rings with SP1 and phone2 rings with SP2?
Quote from: BigJim_McD on May 19, 2014, 10:53:33 AMIf using OBiTalk, use "OBi Expert Configuration" to Disable Call Waiting (Uncheck: "CallWaitingEnable") for both Phone-1 and for Phone-2. If you don't use OBiTalk, directly log onto your OBi202 device via the web "Admin" page and make the changes.Once the changes are made via either of the two methods, "Submit" the changes, then reboot your OBi device.Physical Interfaces PHONE Port PHONE1 Port Calling Features CallWaitingEnable <= ("Uncheck - Call Waiting Enable").Physical Interfaces PHONE Port PHONE2 Port Calling Features CallWaitingEnable <= ("Uncheck - Call Waiting Enable").