OBi110 Setup POTS/911 routing

[russws]

Setting up a Obi110 for my folks. They have a landline at their facility. I am not there and don't have a landline to test things out, and the user manual is unclear to me. I have set up other Obi's just not the 110 landline.

I have set up Google Voice on line 1. I need to make sure that GV is the default outgoing, what the * code is for the landline, and if 911 indeed defaults to the landline.

If there is an easier guide to this than the Device Administration Guide, that would help.

[azrobert]

The POTS/PSTN line is the Primary/default outbound line for an OBi110.

To make GV the Primary line, change the following:
Physical Interfaces -> Phone Port -> Primary line: SP1 Service

911 always defaults to the PSTN Line on an OBi110.

Here is a tutorial:
http://www.obitalk.com/forum/index.php?topic=9104.0
Otherwise, you are stuck with the Admin Guide.

Use prefix **8 to route calls to the PSTN Line.
If you want to play with the configuration you can do some or all of the following WITHOUT a prefix.
Route to PSTN:
7 digit numbers
10 digit numbers
Specific area codes

[russws]

Thanks!