Quote from: billbrew on December 08, 2022, 11:58:54 AMDNSServer1 135.181.200.109 help
DNSServer2 135.181.200.109
I have put that 135.181.200.109 into my OBi and calls to the echo test now fail.
For diagnostic purposes temporarily change the IP addressing to static with the values below. First disable Obitalk Provisioning:
1. Log in to 192.168.1.19
2. Click on System Management
3. Click on AutoProvisioning.
4. In the Obitalk Provisioning Section the first line is Method. Clear the tick box. Then select Disabled from the drop down.
5. Scroll to the bottom and click Submit.
6. Ignore any prompt to reboot.
7. On the left side click Network Settings.
8. Under Internet Settings, clear the tick boxes to enable you to select/enter these settings:
AddressingType Static
IPAddress 192.168.1.19
SubnetMask 255.255.255.0
DefaultGateway 192.168.1.1
DNSServer1 8.8.8.8
DNSServer2 leave completely empty
9. Scroll to the bottom and click Submit.
10. At top right click Reboot
11. Wait 30 seconds then go to the System Status page again. Does the Obitalk Service Status now show Normal. If yes try the echo test number.
12. Report back here.
If the echo test call succeeds this shows that the problem is the DNS address that your OBi is getting from somewhere. The above is not a permanent fix as you will NOT be able to configure GV when the OBi is configured as above.