Hello.
I had tried out the Obiplus PBX setup with no major issue. But since last month, I had discovered that I am no longer eligible for the Obiplus Basic service, which was perfect for my modest 4-line PBX setup. I was advised to try FreePBX and while I learned quite a bit in the process, I'm still clearly not getting it because I would experience things like choppy sound, especially on the other end of the line, which had never been an issue with Obiplus/Obi202. I've read that this is typical of bandwidth restrictions or high ping times, but for some reason, the Obiplus setup worked with the same bandwidth restrictions and delivered audible sound.
So I guess I'm wondering if anyone might be able to help with replicating my experience with Obiplus. I had requested assistance from Obihai and am currently awaiting their response, but I feel that from what I've read here, that there are many experts in the field of SIP, RTP, etc. I still have the 2 Cisco SPA504G phones that I had bought for use with Obiplus and am currently using those with my FreePBX server. But again, even if the FreePBX server is being run on a robust Intel Core i5 2450m cpu and 4GB DDR3 RAM, the Obi202 when used as the Obiplus basic gateway, is still killing it. I'm going to go out on a limb and say that this is not a hardware issue since I doubt that the cpu on the Obi202 wouldn't be capable of being used in a full blown current pc as the Core i5 is used.
I still have the Obi202 and Cisco SPA504G configuration files from the previous setup and I imagine that it just requires a little finagling to get the four lines going again.
Thank you!