I'm attempting to adapt the instructions for letting an IP phone proxy thru the OBi202 device to make outgoing calls via Google Voice. Unsuccessfully.
I've seen other instructions for freepbx and the two variations for the 100/110 devices.
Here's how I'm configured:
OBi202 in Bridge Mode, connected to router via the LAN port.
ITSP Profile D/General -> Signaling Protocol: SIP
ITSP Profile D/SIP -> ProxyServer:
IP Address of FreeSwitch ServerITSP Profile D/SIP -> ProxyServerPort:
5080ITSP Profile D/SIP -> Registrar Server:
blankITSP Profile D/SIP -> OutboundProxyPort:
5080Voice Services/SP4 -> X-ServProvProfile:
DVoice Services/SP4 -> X_InboundCallRoute:
{17935>(Msp1):sp1}Voice Services/SP4 -> X_RegistrarEnalbe:
blankVoice Services/SP4 -> X_UserAgentPort:
5080Voice Services/SP4 -> X_Proxy:
checkedVoice Services/SP4 -> AuthUserName:
17935Voice Services/SP4 -> AuthPassword:
matches Freeswitch Gateway PasswordVoice Services/SP4 -> URI:
17935@IP Address of Freeswitch ServerMy gateway does register, but only after putting the number of the obi
device@pnn.obihai.com in the realm field of my freeswitch gateway.
When I offer a call to the OBI, SNGREP shows an invite, 401 unauthorized, ack, invite (sdp), 100 trying and finishes up with 486 Busy Here.
RTP shows it's attempting PCMU/8000, so I don't expect a codec issue.
Wondering what else is required for the OBI to want to route this call via SPi.
I'm sure somebody smarter than me must have done this before. Thanks in advance of any help.
Tom