On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT
OBi2182
OBi1022
Poly D230
OBi200
OBi202
OBi212
OBiWiFi5G
Started by Judgeless, January 07, 2012, 12:33:42 PM
Quote from: Judgeless on January 07, 2012, 01:03:17 PMIf I cycle power to the Obi and press # I get a dial tone. After I am done I hang up the phone. When I pick up the phone the second time and press # I get the voice message. {There is no service available to complete your call}
Quote from: RonR on January 07, 2012, 01:11:59 PMConnect a splitter to the OBi LINE Port and connect a telephone in addition to the EXT17 line. After you've hung up from the successful access and the OBi is now reporting the error, does the telephone get dialtone and can you make a call from it instead of the OBi?
Quote from: RonR on January 07, 2012, 01:14:38 PMAlso, does the OBi work correctly connected to a normal POTS line?
Quote from: RonR on January 07, 2012, 01:24:57 PMPhysical Interfaces -> PHONE Port -> EnableLINEPortBargeIn : (checked)
Quote from: RonR on January 07, 2012, 01:24:57 PMIf you can now use # repeatedly, you will problably need to make an adjustment or two at:Physical Interfaces -> LINE Port -> Port Settings)
Quote from: RonR on January 07, 2012, 01:35:54 PMGreat! Is that with EnableLINEPortBargeIn unchecked?
Quote from: RonR on January 07, 2012, 01:53:14 PMVoice Services -> ObiTALK Service -> InboundCallRoute : {290123456>(<999:>):li},...
Quote from: RonR on January 09, 2012, 04:34:23 PMPhysical Interfaces -> LINE Port -> RingDelay : 0