Quote from: azrobert on April 22, 2014, 11:28:51 AM
"ph,ph2" will ring both Phone Ports. I think you want ph or ph2.
The OutboundCallRoute is found in Physical Interfaces -> Phone Port 1/2
The error you're getting indicates the provider doesn't like the UserID and/or Password.
Are both SP3 and SP4 failing to register?
I double-checked the UserID and Password for both accounts and they are correct. I changed the X_InboundCallRoute on SP3 to ph2. Under Physical Interfaces>Phone2 Port>OutboundCallRoute is the following long string: {([1-9]x?*(Mpli)):pp},{(<##:>):li},{(<#:>):ph1},{(<**70:>(Mli)):li},{(<**82:>(Mbt2)):bt2},{(<**81:>(Mbt)):bt},{(<**8:>(Mbt)):bt},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Msp3)):sp3},{(<**4:>(Msp4)):sp4},{(<**9:>(Mpp)):pp},{(Mpli):pli} so I left it alone. However, I noticed that also on that page is a parameter for PrimaryLine, which was default-set to SP1, so I changed it to SP3. Reboot produced. . ."Register Failed: 401 Unauthorized (server=199.30.56.194:5060; retry in 24s)" for both SP3 and SP4. I will clear out all SP3 and SP4 settings back to their default values and redo the Callcentric and Circlenet setups on SP2, one at a time (Callcentric for inbound calls and Circlenet for outbound calls), just to verify to myself and the world that they (and I) work and post back. In the mean time, and I know this may be asking a lot, could somebody please post a step-by-step, beginning-to-end configuration guide for using the Voice Gateway method for SP2/Phone2 with Callcentric-in and Circlenet-out with copy/paste examples that can't easily be mistaken -- an example that is designed to be implemented today, not after May 15th? I've had additional eyes check my work and we can't find what is wrong with my Voice Gateway setup.